coupe0crazy
New member
- Joined
- Oct 27, 2021
- Messages
- 1
Hello all,
on my 2014 BMW i3 full electric:
My OEM charging plug locking motor was giving me problems unlocking (several times), where I had to use the emergency manual blue pull cable several time.
Four times, I had to take apart all, to get to the motor (on top of the charging socket) and reset (the pulled emergency release cable) and then to test its function on locking/unlocking. This seemed to resolve my issue (and not to pay my local dealer the high prices they would charge).
This time I couldn't get it to work properly, and said enough with the old motor.
Therefore:
I have just replaced my charging cable plug locking motor with a new part from BMW with Motor P/N 61 13 6 805 425 @ a cost of €93.90 from my local BMW Dealer.
Unfortunately, after installation, I found no change in function from the unit compared to that of the old replaced unit.
I can now unlock (lever on motor at the bottom location), but now cannot lock the cable (lever does not move to the top - lock position).
Manually I can move it to the top lock position, and it unlocks from there (with remote), but does not lock (using remote).
As I say the old unit (which didn't unlock the cable) now does the same exact thing as the new one (doesn't lock the cable now). Somewhere there is a logic circuit with controls its function (both seen in the old unit as well as now the new unit).
Help, Help i3 forum, does anyone have any ideas on where the problem lies? Has anyone experienced this as well?
Cheers,
on my 2014 BMW i3 full electric:
My OEM charging plug locking motor was giving me problems unlocking (several times), where I had to use the emergency manual blue pull cable several time.
Four times, I had to take apart all, to get to the motor (on top of the charging socket) and reset (the pulled emergency release cable) and then to test its function on locking/unlocking. This seemed to resolve my issue (and not to pay my local dealer the high prices they would charge).
This time I couldn't get it to work properly, and said enough with the old motor.
Therefore:
I have just replaced my charging cable plug locking motor with a new part from BMW with Motor P/N 61 13 6 805 425 @ a cost of €93.90 from my local BMW Dealer.
Unfortunately, after installation, I found no change in function from the unit compared to that of the old replaced unit.
I can now unlock (lever on motor at the bottom location), but now cannot lock the cable (lever does not move to the top - lock position).
Manually I can move it to the top lock position, and it unlocks from there (with remote), but does not lock (using remote).
As I say the old unit (which didn't unlock the cable) now does the same exact thing as the new one (doesn't lock the cable now). Somewhere there is a logic circuit with controls its function (both seen in the old unit as well as now the new unit).
Help, Help i3 forum, does anyone have any ideas on where the problem lies? Has anyone experienced this as well?
Cheers,