Setting 3000->BC_V_KORREKTUR in the KOMBI module to nicht_aktiv didn't seem to eliminate the speedometer speed correction as I had hoped. Makes sense because the i3 doesn't have a digital speedometer in its board computer. Still looking for the change I need to make to eliminate the correction factor.alohart said:I believe that the accuracy of an i3's speedometer can be coded to so that the speedometer will display the actual speed rather than default several percent more than the actual speed. However, an Internet search hasn't turned up how to do this on an i3. If you know how, please post your method.
Fisher99 said:I had some time to kill tonight so decided to start reading posts to this thread backwards, starting with newest first, and to my surprise, found the answer to my question about setting the clock to auto-correct via GPS was only 1 page in. Post 519. Will give this a try tomorrow.
Would still like to know if there is a cheat sheet of i3 appropriate coding somewhere though.
websterize said:Fisher99 said:I had some time to kill tonight so decided to start reading posts to this thread backwards, starting with newest first, and to my surprise, found the answer to my question about setting the clock to auto-correct via GPS was only 1 page in. Post 519. Will give this a try tomorrow.
Would still like to know if there is a cheat sheet of i3 appropriate coding somewhere though.
See the coding spreadsheet link in my signature. There are one or two additional URLs inside the sheet.
alohart said:I have been unable to figure out what coding change(s) I need to make to prevent the side mirrors from unfolding when the doors are unlocked. I have coded them to fold when locking using Comfort Access and want to maintain that behavior.
Yes. Side mirrors fold when the doors are locked but don't unfold when the doors are unlocked. That worked on our 2014 and 2019 i3's until my recent update to the November, 2022, system software.3pete said:Just to confirm-- is your desired setup the same as what you had before?
That's certainly a possibility. The behavior I prefer likely isn't a very popular behavior, so it might make sense to combine folding and unfolding into a single parameter.3pete said:Specifically, I'm wondering if BMW tied "Lock=fold and Unlock=unfold" as a single option instead of "Lock=fold" and "Unlock=unfold" as discrete settings. If you already had it the way you want it now, they must be discrete.
BimmerCode did make a backups of my previous settings. I could try to restore the settings to the most recent backup prior to the recent software update. However, I'm concerned that the backups might be valid only with the same BDC software version (i.e., if the software has been updated, backups of previous versions would be invalid). I know that with E-sys, a compatible PSdZ data file must be included. It seems like this PSdZ data file contains mappings of the coding parameters to positions within a data structure which change with each system software update. However, all of this is beyond my knowledge, so I'm just trying to be careful not to mess something up.3pete said:If you took a backup in Bimmercode prior to the update, I wonder if there is a way to compare that to your current settings...
Enter your email address to join: